Traveling Shoe Horns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three compact, packable shoe horns in one set — a thin bent-sheet spoon, a print-in-place folding one
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Traveling Shoe Horns — a set of three compact shoe horns made to travel. Each one is slim enough to slip into a bag, a suitcase, or a coat pocket, so you always have a shoe horn when you are away from home.
The set:
Solid spoon — a thin bent-sheet shoe horn, like a classic slim metal one.
Folding — prints in place and folds roughly in half for storage.
Rotating — the blade pivots in line for use and swings around to stow.
Please Read
these are real tools and need to be printed STRONG.
Print in a SOLID, tough material. PETG recommended. PLA works but is more brittle and can snap, especially the thin solid spoon.
Use plenty of walls and infill — 4 to 5 perimeters, 30 to 40 percent infill.
Treat them with care. Do not over-flex the thin spoon, do not force the fold past its stop, and work the rotating pivot gently. Printed weak or yanked hard, they can crack at a hinge or along a layer line.
Print orientation (already dialed in):
Solid spoon — prints on its SIDE with a brim, no supports.
Folding — prints FLAT and OPEN, gutters up, no supports. Free the hinge gently.
Rotating — prints DEPLOYED, needs SUPPORTS. Work the pivot loose carefully.
0.2 mm layers. About 170 to 185 mm long, all fit a standard bed.