Traveling Shoe Horns
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three compact, packable shoe horns in one set — a thin bent-sheet spoon, a print-in-place folding one
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 37
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
Traveling Shoe Horns — a set of three compact shoe horns made to travel. Each one is slim enough to slip into a bag, a suitcase, or a coat pocket, so you always have a shoe horn when you are away from home.
The set:
Solid spoon — a thin bent-sheet shoe horn, like a classic slim metal one.
Folding — prints in place and folds roughly in half for storage.
Rotating — the blade pivots in line for use and swings around to stow.
Please Read
these are real tools and need to be printed STRONG.
Print in a SOLID, tough material. PETG recommended. PLA works but is more brittle and can snap, especially the thin solid spoon.
Use plenty of walls and infill — 4 to 5 perimeters, 30 to 40 percent infill.
Treat them with care. Do not over-flex the thin spoon, do not force the fold past its stop, and work the rotating pivot gently. Printed weak or yanked hard, they can crack at a hinge or along a layer line.
Print orientation (already dialed in):
Solid spoon — prints on its SIDE with a brim, no supports.
Folding — prints FLAT and OPEN, gutters up, no supports. Free the hinge gently.
Rotating — prints DEPLOYED, needs SUPPORTS. Work the pivot loose carefully.
0.2 mm layers. About 170 to 185 mm long, all fit a standard bed.