DJI Mini 3 Pro Latching Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to safely store and transport your Mini 3 Pro folded up with a battery installed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom-fit protective case for the DJI Mini 3 Pro. Designed to store and transport your Mini 3 Pro folded up with a battery installed—no more props flopping loose or digging the drone out of a foam brick every time you want to fly. Fold it, drop it in, grab and go.
This uses the same printed box + lid + clasp system as my GEPRC Darkstar 22 and Cinelog 30 v3 cases, so if you've printed either of those, you already know how it goes together.
⚠ Always store the drone with the gimbal protector on. Inside this case the drone rests on its camera, and the Mini 3 Pro gimbal is delicate—leaving it bare against the case is asking for trouble. Clip the factory gimbal guard on before the drone goes in. Every single time.
Features
Folded-fit design – Holds the Mini 3 Pro with the arms folded and a battery installed
Secure clasp system – Printed clasp locks the lid down with two M3 x 16mm bolts for a snug, rattle-free closure
Part of the family – Matches the look and hardware of my Darkstar 22 and Cinelog 30 v3 cases
Print Settings
Material: PETG recommended for durability and a little flex
Supports: Shouldn't be needed for this one.
Layer Height: 0.3mm for all parts
Hardware Needed
2× M3 x 16mm bolts (for the lid clasp)
Reminder
Gimbal protector ON before it goes in the case. Worth saying twice.