DJI Mini 3 Pro Latching Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to safely store and transport your Mini 3 Pro folded up with a battery installed.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Custom-fit protective case for the DJI Mini 3 Pro. Designed to store and transport your Mini 3 Pro folded up with a battery installed—no more props flopping loose or digging the drone out of a foam brick every time you want to fly. Fold it, drop it in, grab and go.
This uses the same printed box + lid + clasp system as my GEPRC Darkstar 22 and Cinelog 30 v3 cases, so if you've printed either of those, you already know how it goes together.
⚠ Always store the drone with the gimbal protector on. Inside this case the drone rests on its camera, and the Mini 3 Pro gimbal is delicate—leaving it bare against the case is asking for trouble. Clip the factory gimbal guard on before the drone goes in. Every single time.
Features
Folded-fit design – Holds the Mini 3 Pro with the arms folded and a battery installed
Secure clasp system – Printed clasp locks the lid down with two M3 x 16mm bolts for a snug, rattle-free closure
Part of the family – Matches the look and hardware of my Darkstar 22 and Cinelog 30 v3 cases
Print Settings
Material: PETG recommended for durability and a little flex
Supports: Shouldn't be needed for this one.
Layer Height: 0.3mm for all parts
Hardware Needed
2× M3 x 16mm bolts (for the lid clasp)
Reminder
Gimbal protector ON before it goes in the case. Worth saying twice.