QiDi Q2 Chute Cover with Waste Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chute Cover designed for the Qidi Q2 and poop bin
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is the bin attachment version of the filament waste chute cover for the QiDi Q2. The bin slides into the rail cutouts on the cover. The chute cover can print in place but if printing in a material that flexes to a degree without breaking or deforming such as PETG, you can and likely should print the swing door and body as separate parts. I show this in the attached images. The fit between the bin and chute cover is designed to have some friction to reducing sliding potential during fast acceleration movements of the printer. PLA is likely to be less snug than PETG if using a PLA bin and PETG chute such as what I am showing. If printing in PETG and it is too snug of a fit, increasing the size by 1% or less should be enough.
Poop Bin: This bin is the small version. I am making a larger version and will post it here shortly.
Chute Cover Print Settings
Filament: PETG
Layer Height: .2
Speed: 127 outter / 157 inner
Walls: 3
Supports: yes
Poop Bin Print Settings
Filament: PLA
Layer Height: .2
Speed: 127 outter / 157 inner
Walls: 3
Supports: Yes