1 / 3
Prusa Nextruder Reinforced Magnetic Filament Purge Catcher — zdjęcie 1
1 / 3

Prusa Nextruder Reinforced Magnetic Filament Purge Catcher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of jju182's model to make the base/catch tray more durable and add more magnet sizes.

Ocena
4 / 5
Polubienia
5
Pobrania
30
Wydruki
3
Wyświetlenia
328
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

jju182 made a well thought-out and incredibly useful model ...that I immediately broke by pulling on the catch tray to remove it from my printer. Oops. After breaking the second one in an unfortunate magnet incident (again, 100% my fault), I realized I needed one that was more durable to prevent additional mishaps.

Behold, The Prusa Core One / MK4 Nextruder Magnetic Poop Holder V2 [CHONKY EDITION]:

Features:

  • Thicker filament-caching base (you can safely pull on it now)

  • Gusset between base and mount (no inside-corner right angles)

  • Inset ribbing on the bottom of the base (probably overkill)


This is designed to be printed without any supports. I recommend gluing the magnets in place. The front magnets are a nice press-fit, but the back magnet is a looser fit to prevent warping with larger magnets (since the opening for those cuts into the sides a bit).

Tagi