SolePick Hiker – Keychain Shoe Sole Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small keychain tool to remove stones, dirt and debris from hiking shoe soles.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 82
- Wydruki
- 3
- Wyświetlenia
- 418
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SolePick Hiker is a small 3D printed keychain tool for removing stones, dirt and debris from hiking boots, trail shoes and everyday shoe soles.
After walks, hikes or gravel paths, small stones often get stuck in the tread pattern. Instead of using your fingernails, keys, a screwdriver or a knife, this tool gives you a simple blunt tip to lift debris out of the sole profile.
It is lightweight, quick to print and small enough to keep on a keychain, in your backpack, in the car or near your shoe rack.
Features:
- Keychain size
- Very lightweight
- Blunt lifting tip
- Grip ribs for better handling
- Useful for hiking boots, trail shoes, work shoes and everyday shoes
- No supports needed
- Fast and low-material print
How to use:
Insert the blunt tip from the side of the trapped stone or debris and lever gently. Do not push straight down with excessive force. The tool is designed to help lift small stones and dirt from the tread, not to scrape or cut the sole.
Recommended material:
PETG is recommended for better toughness, especially if you want to carry it on a keychain.
PLA or PLA+ also works well for light use.
Print settings:
- Layer height: 0.20 mm
- Walls/perimeters: 3
- Infill: 20–25 %
- Supports: No
- Brim: Not needed in most cases
- Print orientation: Flat on the build plate
Designed in OpenSCAD, printed and tested with real hiking boots.