Gummy Rat Fridge Magnet - Print-in-Place Magnet Cavity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small gummy rat candy with a hidden 10x5mm cavity for a magnet. A perfect last-meter print: 3 g / 1 meter of filament.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a perfect "last meter" print: it only uses about 3 g - roughly 1 meter - of filament!
Turn your fridge into a candy store with this gummy rat magnet. Print the rat in transparent, colorful filament for a convincing candy-like look. The rats shown in the photos were printed using PETG PRO Burgundy Red.
The model contains an internal 10 x 5 mm cavity for inserting a small magnet during printing (I use these). The included 3MF file is already configured with a pause at the correct layer, allowing you to place the magnet inside before the print continues and seals it in.