Gummy Rat Fridge Magnet - Print-in-Place Magnet Cavity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small gummy rat candy with a hidden 10x5mm cavity for a magnet. A perfect last-meter print: 3 g / 1 meter of filament.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 60
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a perfect "last meter" print: it only uses about 3 g - roughly 1 meter - of filament!
Turn your fridge into a candy store with this gummy rat magnet. Print the rat in transparent, colorful filament for a convincing candy-like look. The rats shown in the photos were printed using PETG PRO Burgundy Red.
The model contains an internal 10 x 5 mm cavity for inserting a small magnet during printing (I use these). The included 3MF file is already configured with a pause at the correct layer, allowing you to place the magnet inside before the print continues and seals it in.