1 / 1
Kyocera / Yashica Samurai TPU lens cap — zdjęcie 1

Kyocera / Yashica Samurai TPU lens cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on my Samurai x3.0 that I got without a lens cap

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The lens cap doesn't interfere with the lens movement when you turn the camera on/off or fiddle with the zoom, so it should be safe to use.

I printed mine in TPU 95a HF and it's easy to put while still holding on well. I went through 3 iterations of the design to get the tolerances right, so you can enjoy the results without spending a whole afternoon tweaking your design :D

Tagi