RatRig V-Core 4/4.1 Creality Nebula Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera mount for the Creality Nebula Camera designed for 3030 extrusions on the RatRig V-Core 4.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I happen to really like the Creality Nebula camera (and you should too!) so I designed this mount to use it on the RatRig V-Core 4 and 4.1.
This will only work on the CoreXY and Hybrid models, it won't work for IDEX because it will interfere with T1. It's designed to mount below the tensioner on the printer. Models for both sides are included, just split into objects and delete the one you don't want. They're also marked L and R for easy identification.
Slice and print it however you want, it's your stuff. Post a pic and a review if you use it and like it!