1 / 1
Reservoir cap for bleeding brakes Euro cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Awesome design, but I didn't get a good thread engagement with the tick gasket I was using.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Awesome design, but I didn't get a good thread engagement with the tick gasket I was using, so I increased 2mm on the height.
Use nylon filament, since even ABS/ASA will be “eat” by the brake fluid.
No, I do not share the design files. Use at your own risk.