HDD Cage compatible with Fractal Design Define R5/R4 and C-type HDD sleds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add more HDD tray slots to your Fractal Design cases.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Summary
This HDD cage is compatible with Fractal Design Define R4 and R5 and probably many others. I tested on the R5. It is specifically compatible with the obsolete type C caddies from Fractal Design, used in the R4 R5 era.
It also has holes to mount on top of the factory made cages. The holes are sized so that regular computers screws will make threads in them.
This models is slightly taller than factory cages with my settings.
I also can confirm this is compatibel with Fractal Design Meshify C HDD tray
Printing
I recommend PETG and enough vertical shells to 100% fill the model.
The model is designed to be printable on its back without support. You may need a brim for bedadhesion though.
Parameters
you may want to change the following parameters:
slots: How many slots tall should it be
cornerGussetLength: Length of the corner gussets, larger makes it more stable, smaller reduces the size of the bottom and top holes (since they occupy the space required for the gussets)
wallThickness: Adds strength
uncScrewSelfTappingHole: hole size. If you print with weird parameters or different filaments you may need to adjust it.