Opel Classic 4-Speed Transmission Tailshaft Plug (Opel GT, Manta A, Kadett B, Ascona A)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent gear oil leaks on classic Opel (GT, Manta) 4-speed gearboxes during engine swaps, storage, or transport.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Prevent Gear Oil Messes During Engine Pulls and Transmission Storage!
This is a functional, heavy-duty plug designed specifically for the rear tailshaft (output shaft housing) of the classic GM/Opel 4-speed manual transmissions found in vintage 1960s and 1970s Opel vehicles.
If you are pulling an engine, swapping a clutch, transporting, or storing an Opel gearbox, the gear oil will inevitably leak out of the open tail housing where the driveshaft slip yoke usually slides in. This snug-fitting plug seals the tail housing tight, saving your garage floor, trunk, or workbench from smelling like vintage 80W-90 gear oil.
Confirmed Compatibility:
Opel GT (1968–1973) with 1.9L 4-Speed Manual
Opel Manta A (1970–1975) with 4-Speed Manual
Opel Ascona A / 1900 (1970–1975) with 4-Speed Manual
Opel Kadett B with compatible 4-speed gearboxes
🛠 Printing Instructions
Orientation: Print the file exactly as it is already oriented (flat on its wide base).
Supports: No supports needed.
If you found this model useful for your vintage Opel restoration project, please post a make and leave a rating! Happy wrenching!