Aerothrow RC Control Surface Throw Meter WitMotion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A practical and lightweight clamp designed to securely hold a WT901BLECL motion sensor on a model aircraft.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount was specifically developed for measuring control surface travel and angles when used with the iOS Aerothrow application. The clamp allows quick installation and removal of the sensor without tools while maintaining a stable and repeatable position during measurements.
Features
Secure mounting for WITMOTION sensors
Quick installation and removal
Lightweight design
Strong grip without damaging the surface
Optimized for control surface travel measurements
Compatible with Aerothrow measurement workflows
Recommended Print Settings
Material: PETG or PLA
Layer height: 0.20 mm
Infill: 15–45%
Supports: Not required
Brim: Optional
Assembly
For one holder, you will need 2 M2x5 and 4 M3x6 screws.
A piece of rubber inner tube stuck under the feet will help keep the clamp in place.
Simply insert the WITMOTION sensor into the dedicated holder and attach the clamp to the control surface or test object. Ensure the sensor is firmly seated before setting the zero point and measurement.
Applications
RC airplanes
Gliders
Mechanical angle measurements
Control surface setup and calibration
Notes
This design was created to simplify and improve the accuracy of control surface travel measurements when used with the iOS Aerothrow application.
Feedback and improvements are always welcome. Happy printing!