1 / 4
Toyota Hilux N80 UHF Radio Microphone Dash Mount — zdjęcie 1
1 / 4

Toyota Hilux N80 UHF Radio Microphone Dash Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toyota Hilux N80 UHF Dash Mount

Ocena
0 / 5
Polubienia
6
Pobrania
135
Wydruki
0
Wyświetlenia
549
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Toyota Hilux N80 UHF Radio Microphone Dash Mount

Keep your UHF radio handset within easy reach with this clean, purpose-built microphone mount designed specifically for the Toyota Hilux N80 (2016–2025). This is a completely original design, custom modelled to attach neatly onto the factory dashboard trim panel — no drilling, no permanent modifications.

Designed primarily around the Icom radio handset clip, but likely compatible with most standard UHF radio handset clips.


✅ Features

  • Tight, factory-flush fit to the Hilux N80 centre dash trim

  • No supports required (print face-down)

  • No drilling — attaches with double-sided tape

  • Clean, low-profile design that doesn't obstruct controls

  • Angled towards driver for clear view and audio


🖨 Recommended Print Settings

Setting

Value

Material

ASA or ABS (preferred) / PETG (cooler climates only)

Layer Height

0.2 mm

Perimeters/Walls

3

Infill

24%

Supports

Not required (print face-down)

⚠ ASA or ABS is strongly recommended for UV and heat resistance — dashboards in direct sunlight can reach extreme temperatures that will deform PLA or PETG.


🔧 Installation

  1. Print face-down — no supports needed.

  2. Clean the dash trim with isopropyl alcohol.

  3. Apply double-sided tape (VHB tape works well) to the flat rear face.

  4. Align rear into recess, as shown in photos.

  5. Press firmly onto the dash trim and allow to cure. 

💡 Tip: If tape adhesion to ASA is poor, lightly coat the back surface with a thin layer of PVA glue or super glue and allow to fully cure before applying tape. This creates a much better bonding surface.


🚗 Compatibility

  • Toyota Hilux N80 — 2016 to 2025 (all models)

  • Radio handset: Icom (confirmed) — likely compatible with other brands

Tagi