Arturia MiniFreak Clip-on Note Training Rail

Arturia MiniFreak Clip-on Note Labels

Removable clip-on note labels for the Arturia MiniFreak.

This is a simple learning aid for beginners who want to quickly identify the notes on the MiniFreak keyboard without using stickers or making any permanent modification to the instrument.

The clip-on note labels use the international note naming system:

C C# D D# E F F# G G# A A# B

What to print

To cover the full Arturia MiniFreak keyboard, print:

• 2x NoteTrainingRail

• 1x NoteTrainingRail_C-C

The parts simply clip onto the keyboard area and can be removed easily.

On my MiniFreak, they clip on and off smoothly and do not interfere with the key mechanism. However, please check the fit carefully on your own unit before regular use.

Depending on your printer, material, and tolerances, you may need to lightly sand the inner edge to prevent the parts from touching the keys or interfering with key movement.

Recommended print settings

• Material: PETG recommended

• Print orientation: upright / vertical, as shown in the slicer preview

• Supports: organic supports

• Perimeters: 2

• Extra perimeters if needed: enabled

• Brim: 10 mm

• Layer height: 0.20 mm should be fine

• Infill: 10–20% is enough

• Nozzle: 0.4 mm

Important: print the parts upright. This gives the clip better strength and keeps the label face clean.

A brim is strongly recommended because the parts are tall and narrow when printed upright. I used a 10 mm brim.

Notes

This was designed for my Arturia MiniFreak. Tolerances may vary between printers, materials, and individual units.

Before playing, make sure that the label rail does not press on the keys, rub against them, or interfere with keyboard movement.

On my unit, the Decksaver still fits with the labels installed. Your fit may vary depending on print tolerances.

Use at your own risk.

This model is shared for personal, non-commercial use only.