1 / 4
Meshtastic FakeTec case with battery 503450 and spiral 868mhz antenna inside. — zdjęcie 1
1 / 4

Meshtastic FakeTec case with battery 503450 and spiral 868mhz antenna inside.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

small meshtastic or meshcore node case for FakeTec case with lipo 503450 battery and internal 868mhz antenna

Ocena
0 / 5
Polubienia
7
Pobrania
33
Wydruki
0
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Meshtastic case sized of a car alarm keychain. Key idea - make cheap keychain meshtastic node - always with you. You connect it, charge it, sending/reciving messages... thats all. No place for buttons or attachments - just basic functions.

Fit:
- FakeTec v5 node on nrf52840 (promicro)
- small LiPo battery 503450
- internal spiral antenna (selfmaded with attached template)
Print settings: PETG, no support needed.

The antenna is mading by winding 5mm thick wires onto an antenna template. Then antenna+template construction mounting into front case at corresponding mount.
Antenna template founded on article https://e.pavlin.si/2018/06/29/small-normal-mode-antenna-for-868mhz.
VSWR of assembled construction hadn't measured (I have no nanovna). If someone can measure VSWR and adjust construction - give feedback, please.

Tagi