1 / 4
Meshtastic FakeTec case with battery 503450 and spiral 868mhz antenna inside. — image 1
1 / 4

Meshtastic FakeTec case with battery 503450 and spiral 868mhz antenna inside.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

small meshtastic or meshcore node case for FakeTec case with lipo 503450 battery and internal 868mhz antenna

Rating
0 / 5
Likes
7
Downloads
33
Makes
0
Views
274
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Meshtastic case sized of a car alarm keychain. Key idea - make cheap keychain meshtastic node - always with you. You connect it, charge it, sending/reciving messages... thats all. No place for buttons or attachments - just basic functions.

Fit:
- FakeTec v5 node on nrf52840 (promicro)
- small LiPo battery 503450
- internal spiral antenna (selfmaded with attached template)
Print settings: PETG, no support needed.

The antenna is mading by winding 5mm thick wires onto an antenna template. Then antenna+template construction mounting into front case at corresponding mount.
Antenna template founded on article https://e.pavlin.si/2018/06/29/small-normal-mode-antenna-for-868mhz.
VSWR of assembled construction hadn't measured (I have no nanovna). If someone can measure VSWR and adjust construction - give feedback, please.

Tags