Dust Collection 2.5 to 4in Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adpater is designed to connect to a 4 inch flexible hose and reduce to a 2.5 inch flexible hose.
- Ocena
- 5 / 5
- Polubienia
- 198
- Pobrania
- 1515
- Wydruki
- 4
- Wyświetlenia
- 5478
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This adpater is designed to connect to a 4 inch flexible hose and reduce to a 2.5 inch flexible hose. The intended purpose for woodworking dust collection.
The STEP file is included.
Inlet Outer Diameter: 2.5 inches
Outlet Outer Diameter: 4 inches
Wall Thickness: 2.5mm
Hose Overlap: 1 inch
Reduction Length: 1.5 inches
Overall Height: 3.5 inches
Overall Width: 4 inches
Printer Settings
Material: Hatchbox ABS (Most rigid materials will work fine for this task, I used what I had on hand)
Vertical Perimeters: 4
Horizontal Perimeters: 5
Infill: 42%
Infill Type: Rectilinear
Printer Utilized: Voron 2.4
No supports or post processing is required
Category: Tools