IKEA PAX Shelf Drill Jig / Guide - 20x58x236 cm (7 7/8x22 7/8x92 7/8) Add-on End Unit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill guide to add extra shelves to your IKEA PAX Add-on End Unit (236cm) with factory-like spacing using a 4.9mm bit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — NoDerivatives
Overview
This is a precision template system designed specifically for the IKEA PAX Add-on End Unit - 20x58x236 cm (7 7/8x22 7/8x92 7/8 ) version.
Standard PAX wardrobe add-on units come with pre-drilled holes for shelves, but the spacing leaves large empty gaps. If you want to add extra shelves (for example, by buying a second unit and salvaging its shelves for a high-density shelf layout), you need to drill new peg holes with factory-like precision.
This system uses a mirrored dual-panel setup, allowing you to align both side panels and drill all 8 holes for a single shelf simultaneously with perfect symmetry.
How the System Works (2-Piece Design)
Instead of drilling one side at a time and risking misaligned shelves, this system is designed to drill both the left and right side panels flat on the floor in a mirrored fashion:
The Alignment Bracket (Top): A non-drilling alignment piece with integrated registration pegs. You place the two side panels side-by-side and pop this bracket into the existing factory holes to lock the panels together in perfect, mirrored alignment.
The Drill Guide (Bottom): A two-part guide that connects in the center to form a single long bar (40cm+). It features slots on the bottom to insert printed "aligners" that slide directly into the back-panel grooves of the PAX boards, automatically centering and aligning the guide.
By drilling both boards at the same time, your shelves are guaranteed to be 100% level.
Open Source / Remix Friendly
I believe in true open hardware. Unlike many creators who only upload mesh files (STL), I always provide the high-quality source files to the community to make remixes and mods easier.
Included File: pax_add_on_drill_guide.step (includes the guide halves, the alignment bracket, and the back-groove aligners)
Feel free to download the STEP file to modify the guide for different wardrobe heights (such as the 201cm unit) or custom spacing configurations.
Design Details & Spacing
Shelf Spacing: The extra shelves are spaced at 22.5 cm apart (measured center-to-center), matching the spacing of the top shelves of the unit.
Leftover Space: The remaining headroom is left at the bottom, between the factory bottom shelf and the lowest extra shelf—ideal for taller items or shoes.
Drill Bit Size: Designed for a 4.9 mm drill bit (standard IKEA shelf pin size).
Print Instructions
Because this is a drill guide, the drill bit will naturally rub against the inside walls of the guide holes. To ensure longevity and prevent the guide from wearing out or enlarging during use, follow these print settings:
Material: PET-GF (Glass Fiber reinforced PET) is highly recommended for its exceptional rigidity, hardness, and wear resistance. Tough PLA or PETG can also be used, but print extra walls to compensate for wear.
Perimeters (Walls): Use 5 to 6 wall loops (crucial for protecting the integrity of the guide holes).
Infill: 30% - 40% is sufficient (Gyroid or Grid recommended).
Supports: None required.
Step-by-Step Instructions
Preparation: Remove the two side panels from the wardrobe (or lay them flat before assembly). Place them side-by-side, mirrored, with the back-panel grooves facing each other in the center.
Lock Alignment: Insert the Alignment Bracket into the existing factory holes at the top/middle of the panels to lock their relative positions.
Assemble the Guide: Insert the printed aligners into the slots on the bottom of each half of the drill guide, then join the two halves together in the center.
Set Drill Depth (CRITICAL):
WARNING: Do not drill all the way through the side panels!
Wrap a piece of painter's tape around your drill bit (or use a mechanical drill stop collar) to limit the drill depth to match the factory holes.
Position & Drill: Place the assembled drill guide over the boards, ensuring the bottom aligners slide into the back-panel grooves in the center. Slide the guide to your desired shelf height position, clamp it down (e.g. step on it with your toes), and drill the holes.
Install: Pop in your shelf support pins and slide your new shelves into place!
Support My Work
If this guide helps keep your project clean and organized, feel free to support my open-source work!
GitHub: https://github.com/aniva
Author: Aniva