Hidden-Screw Angle Bracket for Cutting Boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hidden-screw angle bracket is designed to securely hold cutting boards against a cabinet or wall.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
# Hidden-Screw Angle Bracket for Cutting Boards
## Introduction
This hidden-screw angle bracket is designed to securely hold cutting boards against a cabinet or wall while keeping the screws completely concealed. The dovetail groove on the back of the bracket allows screw heads to sit flush, ensuring a clean, minimalist look.
## Features
- Hidden screw design: Screws are fully concealed for a sleek appearance.
- Dovetail groove: Ensures a snug fit for 3 x 16 mm countersunk wood screws.
- Parametric model: Fully customizable in Fusion 360 adjust it to fit your needs.
- Sturdy and practical: Ideal for organizing cutting boards.
---
## Assembly Instructions
1. Print the bracket as is or customize the parameters in Fusion 360 to match your requirements.
2. Attach to the cabinet or wall:
- Use two 3 x 16 mm countersunk wood screws per bracket.
- Ensure the screws are aligned vertically in the dovetail groove for a flush fit.
3. Slide the cutting board into the bracket.
Tip: Pre-drill holes in the cabinet or wall to prevent splitting.
## Print Settings
- Layer height: 0.2 mm (for a balance of strength and speed).
- Infill density: 15 % (sufficient for structural integrity).
- Wall layers: 3
- Nozzle size: 0.4 mm
- Supports: Should not be required if you don't change the orientation.
## Materials
- Filament: PETG
- Hardware: 3 x 16 mm countersunk wood screws (2 per bracket).
## Scaling and Customization
This is a parametric model open it in Fusion 360 to adjust it.