Hidden-Screw Angle Bracket for Cutting Boards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This hidden-screw angle bracket is designed to securely hold cutting boards against a cabinet or wall.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
# Hidden-Screw Angle Bracket for Cutting Boards
## Introduction
This hidden-screw angle bracket is designed to securely hold cutting boards against a cabinet or wall while keeping the screws completely concealed. The dovetail groove on the back of the bracket allows screw heads to sit flush, ensuring a clean, minimalist look.
## Features
- Hidden screw design: Screws are fully concealed for a sleek appearance.
- Dovetail groove: Ensures a snug fit for 3 x 16 mm countersunk wood screws.
- Parametric model: Fully customizable in Fusion 360 adjust it to fit your needs.
- Sturdy and practical: Ideal for organizing cutting boards.
---
## Assembly Instructions
1. Print the bracket as is or customize the parameters in Fusion 360 to match your requirements.
2. Attach to the cabinet or wall:
- Use two 3 x 16 mm countersunk wood screws per bracket.
- Ensure the screws are aligned vertically in the dovetail groove for a flush fit.
3. Slide the cutting board into the bracket.
Tip: Pre-drill holes in the cabinet or wall to prevent splitting.
## Print Settings
- Layer height: 0.2 mm (for a balance of strength and speed).
- Infill density: 15 % (sufficient for structural integrity).
- Wall layers: 3
- Nozzle size: 0.4 mm
- Supports: Should not be required if you don't change the orientation.
## Materials
- Filament: PETG
- Hardware: 3 x 16 mm countersunk wood screws (2 per bracket).
## Scaling and Customization
This is a parametric model open it in Fusion 360 to adjust it.