Protection cap for Specialized Turbo Levo battery charger connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap-on cap designed to protect the magnetic connector on the Specialized Turbolevo Gen.3 charger
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this cap to protect the magnetic connector on my Specialized Turbolevo’s charger.
I made mine from PCTG, but it could easily be printed in PETG.
If you want to print it in PLA, go ahead, but I’m not sure whether the locking teeth might become brittle.
Along with the cap, I’ve also designed and printed a small retaining elastic band that keeps the cap attached to the connector even when it’s not inserted.
The elastic band must be printed in TPU because the loop that connects it to the connector needs to stretch to fit.
On the opposite side to the loop, there’s a small arrow that slots into the hole in the cap, ensuring the whole thing stays securely connected.
The basic idea came to me from the system used for clothing labels.