1 / 7
BetaFPV Air65 Wall Mount for IKEA Skådis Pegboard — zdjęcie 1
1 / 7

BetaFPV Air65 Wall Mount for IKEA Skådis Pegboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Single-piece wall mount for the BetaFPV Air65 1S Whoop. Fits IKEA Skådis. Holds the drone in any orientation.

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Air65 Wall Mount for IKEA Skådis

A clean, single-piece wall mount for the BetaFPV Air65 1S Tiny Whoop. No more drones rotting in a drawer between cables and accessories — just snap the holder onto your IKEA Skådis pegboard and your whoops sit on the wall, ready to grab and fly.

👉 Got a bigger whoop?
There's now a Meteor75 version too — same design, scaled up with an extra hook.

Why this design works

Instead of modeling the exact shape of the drone, the holder uses a rounded rectangular pocket. The reason: the Air65 isn't symmetrical because of the battery connector at the back. With an exact-fit design you'd have to insert the drone in one specific orientation every time — and it wouldn't fit at all with the battery attached.

This design solves that. The drone sits perfectly, but you can drop it in in any orientation — even with the battery mounted. The slightly chunkier body also leaves room on the sides for stickers, and the center hole saves material and print time without sacrificing stability.

Print settings

  • Material: any material works — no special requirements

  • Settings: completely standard / default profile

  • Supports: tree support only for the IKEA hooks on the back

  • Orientation: as oriented in the file

  • Prints as a single piece — no assembly required

Mounting

The integrated L-hooks are designed and tuned for the IKEA Skådis pegboard. They snap in and hold rock-solid — no wobble. Print as many as you need and your wall grows over time.

Left and right versions included — purely cosmetic. The pocket opening faces left on one and right on the other, so you can mix them for a symmetrical look on the wall. Function is identical, pick whichever you like.

Custom backplates

The holder takes a removable backing plate, so you can personalize the look. Three plates are included:

  • a blank version

Want to design your own? Here are the dimensions:

  • Size: 82.2 × 82.2 mm

  • Thickness: 0.6 mm

  • Corner radius: 18.1 mm

Tip: print the plate at 0.2 mm layer height or finer for best results — it's a thin part. Drop in your own artwork, text, or sticker design, and if you make one, share it as a remix.

Printing the logo backplates (multicolor)

How to color the logo in Bambu Studio:

  1. Place the plate with the logo facing down (toward the build plate)

  2. Select the model and open the Color Painting tool (shortcut: N)

  3. Choose the Fill mode with edge detection enabled

  4. Click the logo area — it fills the logo with your chosen color automatically

  5. Assign your colors and slice as usual

Video

Full build video (German with English subtitles): 


If you print one, I'd love to see it — share a make!

Tagi