1 / 2
Ultra Low Profile Sovol SV01 BLTouch Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed BLTouch mount for the lowest profile. Countersunk screws and thin mount let you use a shorter hotend.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
Remixed BLTouch mount for the lowest profile. I had issues with all other BLTouch mounts causing the probe tip to nearly touch the print since the NF Crazy / mosquito + BMG with V6 adapter is pretty low.
Countersunk screws and thin mount let you use a shorter hotend. Remixed from https://www.thingiverse.com/thing:5019625
Use countersunk M3 hardware to mount the bltouch.