Tamiya TT-02 Replacement Ball Joint for Yeah Racing Drift Steering Kit (read desc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is replacement for original ball joint part. It requires the original metal adjustable screw (or any screw)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement part designed for the Yeah Racing drift steering conversion on the Tamiya TT-02 chassis.
This part was modeled to replace the original component and tested on a TT-02 drift setup. Uses the original metal screw with the kit (or any screw).
Printing recommendations:
PETG, ABS, ASA
4+ perimeters
Print on its side for it to be as strong as it can be!!!
0.1 mm layer height is recommended
To print:
Print with a strong plastic
Place the model in the slicer on its side
Select supports
(0.1 layer height recommended)
To assemble:
Screw the screw into the base, then press onto the ball.
Move the steering around a bit (will be tight at first).
Tested fitment on a TT-02 chassis with a Yeah Racing drift steering assembly.