Tamiya TT-02 Replacement Ball Joint for Yeah Racing Drift Steering Kit (read desc)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part is replacement for original ball joint part. It requires the original metal adjustable screw (or any screw)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Replacement part designed for the Yeah Racing drift steering conversion on the Tamiya TT-02 chassis.
This part was modeled to replace the original component and tested on a TT-02 drift setup. Uses the original metal screw with the kit (or any screw).
Printing recommendations:
PETG, ABS, ASA
4+ perimeters
Print on its side for it to be as strong as it can be!!!
0.1 mm layer height is recommended
To print:
Print with a strong plastic
Place the model in the slicer on its side
Select supports
(0.1 layer height recommended)
To assemble:
Screw the screw into the base, then press onto the ball.
Move the steering around a bit (will be tight at first).
Tested fitment on a TT-02 chassis with a Yeah Racing drift steering assembly.