Bosch/Sortimo l-boxx clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make my own wooden version of a l-boxx that is fully compatible with the genuine 370mm l-boxx I purchased
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I wanted to make my own wooden version of a l-boxx that is fully compatible with the genuine 370mm l-boxx I purchased with my router. Thus i designed an insert that can be added to a wooden box or crate.
a small 30x8x1mm spring (or similar )should be added to the center pin on part 2.
part 2 should be printed sideways to give additional strength to the hooks
this object works with the slimline clamp created by TheMakerShedNZ:
https://www.thingiverse.com/thing:2235462
please post pictures of your makes of this object, I'm very curious how you'll use this design
UPDATE 8/15/2018: I've released a upgraded version of this design that uses a steel rod as an axis. this makes the clamps sturdier but also a bit heavier and more tedious to assemble. Therefore, I will leave this design online and release the heavy duty version seperately: see my profile for the reinforced one
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
Yes
Resolution:
0.15mm
Infill:
70%
Notes:
part 2 should be printed sideways to give additional strength to the hooks, therefore, it will need support. Part 1 can be printed without support
Category: Tool Holders & Boxes