Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla high
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple corner pegs high -- minimalist mount for IKEA Samla 45L bin as top cover on the Snapmaker U1 printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- BSD License
Original description:
Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top.
Voilà ! With that cover and this five-gram low-profile mount, your Snapmaker U1 is now sufficiently enclosed to retain the heat necessary to print with high-temperature materials like polycarbonate without the warping that comes from cooling too quickly.
This works well for me, resulting in a passively heated chamber of up to 54°C on a 16°C day. Tape over a portion of the vent at the rear if you need to retain even more heat.
Remix modification:
The peg is 20 milimeters higher to avoid the ptfe tubes to collide with the cover, you can choose to use 2 original in the front and 2 higher in the back or use 4 high