1 / 1
Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla high — image 1

Snapmaker U1 Lid Pegs - Easy Mount for IKEA Samla high

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple corner pegs high -- minimalist mount for IKEA Samla 45L bin as top cover on the Snapmaker U1 printer.

Rating
0 / 5
Likes
2
Downloads
17
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

License
BSD License

Original description:

Remove the factory silicone plugs and replace them with these four pegs, positioning their protrusions toward the printer’s centerline. Then place an inverted Samla 45L bin ($7 at IKEA) on top.

Voilà ! With that cover and this five-gram low-profile mount, your Snapmaker U1 is now sufficiently enclosed to retain the heat necessary to print with high-temperature materials like polycarbonate without the warping that comes from cooling too quickly.

This works well for me, resulting in a passively heated chamber of up to 54°C on a 16°C day. Tape over a portion of the vent at the rear if you need to retain even more heat.

Remix modification: 

The peg is 20 milimeters higher to avoid the ptfe tubes to collide with the cover, you can choose to use 2 original in the front and 2 higher in the back or use 4 high

Tags