1 / 7
Foldable Credit Card Size Phone Stand - Print in Place — zdjęcie 1
1 / 7

Foldable Credit Card Size Phone Stand - Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A foldable phone stand that can fit in your wallet!

Ocena
4,5 / 5
Polubienia
46
Pobrania
258
Wydruki
2
Wyświetlenia
1739
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a folding phone stand that is small enough to fit in your wallet. Print it and take it with you wherever you go!

The overall dimensions are 85mm x 53.5mm x 4mm. This is the thinnest I could make it without breaking the design, which leaves it about the thickness of 4 credit cards.

It can be adjusted to 2 different angles when unfolded (see pictures)

As for printer settings, make sure your printers dimensional accuracy is dialed in or it may not print right. You may also need a brim to keep it from warping and so I've included a second file with a custom brim added. Most slicing software will add the brim to the inside pieces as well meaning you have to cut them with a razor afterwards. If you don't want that but need a brim, download the file with the custom brim added. When it's done printing you may need a scraper or butter knife to unstick the folding pieces but they should come apart pretty easily. I had no problem with it.

I printed this in blue/gray Overture PLA at 30% infill and 0.1mm layer height on a Creality CR-10s

Let me know what you think of the design and I hope you enjoy it!

Tagi