Foldable Credit Card Size Phone Stand - Print in Place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A foldable phone stand that can fit in your wallet!
- Rating
- 4.5 / 5
- Likes
- 46
- Downloads
- 258
- Makes
- 2
- Views
- 1,742
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is a folding phone stand that is small enough to fit in your wallet. Print it and take it with you wherever you go!
The overall dimensions are 85mm x 53.5mm x 4mm. This is the thinnest I could make it without breaking the design, which leaves it about the thickness of 4 credit cards.
It can be adjusted to 2 different angles when unfolded (see pictures)
As for printer settings, make sure your printers dimensional accuracy is dialed in or it may not print right. You may also need a brim to keep it from warping and so I've included a second file with a custom brim added. Most slicing software will add the brim to the inside pieces as well meaning you have to cut them with a razor afterwards. If you don't want that but need a brim, download the file with the custom brim added. When it's done printing you may need a scraper or butter knife to unstick the folding pieces but they should come apart pretty easily. I had no problem with it.
I printed this in blue/gray Overture PLA at 30% infill and 0.1mm layer height on a Creality CR-10s
Let me know what you think of the design and I hope you enjoy it!