Voron 2.4 Horizontal Cable Chain Mount for Wrist Watch G2 Extruder and BD Pressure board mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drag chain mount using a F695 bearing. Compatible with WWG2/A4T and BD Pressure
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the how the original used an F695 bearing a pivot for a drag chain mount, but the it was for an orbiter/stealthburner. I redesigned it so that it would work with a Wristwatch G2 extruder/A4T toolhead, and I made everything as compact as I could. I also modified the 2.4 cable chain gantry mount to match the height of the new toolhead assembly. I also mirrored the chain mount part on the toolhead, and modified for a two hole chain
Components | Qty |
|---|---|
F695 ZZ or RS | 1 |
Heatinsert M3 | 4 |
M5x12 BHCS | 1 |
M5x10 BHCS | 2 |
M5 nut | 1 |
M5 2020 Drop in Tnut | 2 |
M5 Washer | 1 |
10mm Stand-off Both ends Threaded | 2 |
M3 nut | 3 |
M2x10 BHCS | 1 |
M2x6 BHSC or SHCS | 1 |
Designed to be used with My remix of this H36 mount: