Voron 2.4 Horizontal Cable Chain Mount for Wrist Watch G2 Extruder and BD Pressure board mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A drag chain mount using a F695 bearing. Compatible with WWG2/A4T and BD Pressure
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the how the original used an F695 bearing a pivot for a drag chain mount, but the it was for an orbiter/stealthburner. I redesigned it so that it would work with a Wristwatch G2 extruder/A4T toolhead, and I made everything as compact as I could. I also modified the 2.4 cable chain gantry mount to match the height of the new toolhead assembly. I also mirrored the chain mount part on the toolhead, and modified for a two hole chain
Components | Qty |
|---|---|
F695 ZZ or RS | 1 |
Heatinsert M3 | 4 |
M5x12 BHCS | 1 |
M5x10 BHCS | 2 |
M5 nut | 1 |
M5 2020 Drop in Tnut | 2 |
M5 Washer | 1 |
10mm Stand-off Both ends Threaded | 2 |
M3 nut | 3 |
M2x10 BHCS | 1 |
M2x6 BHSC or SHCS | 1 |
Designed to be used with My remix of this H36 mount: