Milsbo Shelf Holder Small Plant Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple way to add small plants to your IKEA Milsbo without taking up a lot of space.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a lot of extra shelf slots remaining after installing the shelves that I wanted so I added small plant pots to the remaining slots.
I decided to print them a bit denser so that it is less likely that water seeps into the print; since this was designed for succulents that need very little water, I did not add drainage holes but I can if someone is having trouble doing that in their slicing program of choice.
Willing to add a catch tray as well.
Printed with Matter3D Performance PETG, 0.4mm nozzle, 5 perimeters, 5 top/bottom layers, 25% gyroid infill.