Voron StealthBurner Mount for Ender 5 Plus - HGR15 Linear Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 5 Plus Stealthburner mount remixed for HGR15 linear rail and bearing, with CR Touch bracket cutout and M3 threaded
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a remix of the Ender 5 Stealthburner Linear Rail Mount, modified to work with the standard Ender 5 Plus carriage and an HGR15 linear rail and bearing block.
Features:
Mounting interface for HGR15 linear bearing block (26x26mm bolt pattern, M4 hardware)
Cutout for the standard CR Touch bracket
Removed V-slot wheel carriage geometry
Two-piece clamping design that bolts directly to the HGR15 carriage
Hardware needed:
4x M4 socket head cap screws (for HGR15 carriage mounting)
4x M3 threaded inserts (for Stealthburner mounting)
Print settings:
Print each half separately
Material: PETG or ABS recommended
No supports needed
Layer height: 0.2mm
Infill: 40% or higher
Important note:
Do not use the existing side holes to clamp the two halves together — they interfere with the HGR15 bearing block screws. A clamping bolt hole will be added in a future update.