Precision 130 DC Motor Mount (20mm x 15mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, robust, and low-profile mounting bracket specifically designed for standard class 130 DC motors (commonly used
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Precision 130 DC Motor Mount / Holder (20mm x 15mm)
A simple, robust, and low-profile mounting bracket specifically designed for standard class 130 DC motors (commonly used in RC toys, mini 4WD cars, and small robotics).
This mount features an open-ended design, meaning the length of the motor does not matter. It is perfectly tailored to clamp motors with the standard flat-sided profile:
Width (Diameter): ~20 mm
Height: ~15 mm
Features:
Perfect Snap Fit: Engineered precisely for the flat-sided 130 motor casing to prevent spinning or sliding.
Easy Mounting: Includes 2 integrated screw holes (Ø 2.5 mm) for secure installation.
Low Profile: Keeps the motor axis as close to the chassis as possible.
Easy Mounting: Includes 4 integrated screw holes for secure installation.
Print-Friendly: 100% support-free design.
Recommended Print Settings:
Material: PLA+, PETG, or ABS/ASA.
Infill: 20–30% (Gyroid or Grid).
Walls/Perimeters: 3 for optimal structural strength around the mounting tabs.