1 / 4
Thule Wingbar Evo Roof Rack Bar Top T-Track Replacement Insert/Cover — zdjęcie 1
1 / 4

Thule Wingbar Evo Roof Rack Bar Top T-Track Replacement Insert/Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model inserts cleanly into the T-Track of the Thule Wing Bar Evo roof rack crossbar to reduce noise.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
200
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This T-Track insert specifically fits the Wingbar Evo roof rack crossbar from Thule. I made it because the Wingbar Evo rubber strip insert comes out fairly easily and is both more expensive and more difficult to find than the rubber strips that are standard for most roof rack crossbars. 
 
This model is 240mm in length and is intended to be printed in pieces to fill the full length of the crossbar. To get an exact fit, you'll need to scale the long axis of at least 1 piece to the correct length in your slicer. Print with the wide side down (as oriented in model).

This can be printed in TPU, of course, if you want a rubbery texture to match the OEM strip. But I printed them in ASA for UV resistance and resilience. I recommend ASA or PETG. PLA would be the worst choice and likely fail. ABS would work but doesn't handly UV well. 

This will NOT fit the standard Wingbar from Thule. The standard Thule Wingbar has stripping easily available for cheap online - but it's harder to find for the Evo lineup at a good price.

Note: This is not the split/2-piece design that allows you to snap inserts into place with the rubber strip in-place. I don't use such inserts (and suspect most don't), and find that design holds a bit less securely than a single-piece strip. 

Tagi