1 / 3
Comfy Nozzle Wrench - Easy print. Hope you 'like' it. :)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Comfy and easy to print nozzle wrench. v2
- Ocena
- 4,833 / 5
- Polubienia
- 41
- Pobrania
- 156
- Wydruki
- 7
- Wyświetlenia
- 795
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (0)Kolekcje (42)Powiązane
Comfy and easy to print nozzle wrench.
Fits a 3/8 drive 6mm (or 7mm) Husky socket from HomeDepot.
I used this $2.50 wonder: https://www.homedepot.com/p/Husky-3-8-in-Drive-6-mm-6-Point-Metric-Standard-Socket-H3D6P6MM/202913499
If you want a super tight fit, put a single wrap of Scotch tape around the outside of the socket before you push it in.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Notes:
Easy to print flat side down.
Category: 3D Printer Accessories