Open Window Catch & Limiter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printable window position limiter (stay catch) designed to securely lock a house window
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 3D-printable window position limiter (stay catch) designed to securely lock a house window in an open or slightly open position. It prevents the window from slamming shut or swinging wide open due to drafts and wind.
The mechanism utilizes a spring-loaded metal pin (plunger) that slots into a track/receiver block to hold the window firmly in place.
Hardware Required:
1x Metal pin/bolt (approx. diameter and length can be specified by you, e.g., M5/M6 pin)
1x Compression spring
2x Small screws for mounting the base plate
Printing Instructions:
Material: PETG or ASA/ABS recommended for durability and UV resistance (if exposed to direct sunlight). PLA can be used for indoor/shaded windows.
Infill: 30%–40% (Gyroid or Grid for mechanical strength).
Walls/Perimeters: 3 or 4 lines to ensure the mounting tabs and pin housing don't snap under tension.
Supports: Needed only for the main body overhang where the spring pin goes through (depending on your print orientation).