1 / 3
Voron PTFE bowden tube support (608 bearing - bolted) — zdjęcie 1
1 / 3

Voron PTFE bowden tube support (608 bearing - bolted)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a PTFE guide or PTFE bowden tube support for Voron 2.4 (and likely Trident) with a 608 bearing.

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
CERN Open Hardware Licence Version 2 - Strongly Reciprocal

I needed to add a PTFE guide to my Voron 2.4 build an I came across the one from @Alia5_155893. 

However, compared to the initial design, I wanted:
- The guide to be screwed to the bearing
- The ability to install the tube support without having to remove any panels
=> So I editted the files to add these features.

Materials:
- Qty. 1 M3x8 screw and M3 hammerhed nut to attached on the extrusion
- Qty. 1 M3x12 screw and M3 insert

Assembly:
- Insert the M3 insert in the long or shot arm.
- ‘Press’ fit the bearing in the mount.
- Install the mount on the printer.
- Insert the M3x12 screw in the pin part.
- Locate the arm on the top of the bearing and screw the pin + M3 screw from underneath.

Note:
I find the long arm to work well on my 350 Voron 2.4

Tagi