1 / 3
Voron PTFE bowden tube support (608 bearing - bolted) — image 1
1 / 3

Voron PTFE bowden tube support (608 bearing - bolted)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a PTFE guide or PTFE bowden tube support for Voron 2.4 (and likely Trident) with a 608 bearing.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
CERN Open Hardware Licence Version 2 - Strongly Reciprocal

I needed to add a PTFE guide to my Voron 2.4 build an I came across the one from @Alia5_155893. 

However, compared to the initial design, I wanted:
- The guide to be screwed to the bearing
- The ability to install the tube support without having to remove any panels
=> So I editted the files to add these features.

Materials:
- Qty. 1 M3x8 screw and M3 hammerhed nut to attached on the extrusion
- Qty. 1 M3x12 screw and M3 insert

Assembly:
- Insert the M3 insert in the long or shot arm.
- ‘Press’ fit the bearing in the mount.
- Install the mount on the printer.
- Insert the M3x12 screw in the pin part.
- Locate the arm on the top of the bearing and screw the pin + M3 screw from underneath.

Note:
I find the long arm to work well on my 350 Voron 2.4

Tags