Mobile Air Conditioner Window Seal fastener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bracket to put on a window in order to hold in place the Isolation material
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Goal
When using mobile air conditioning device there is a hose pushing out hot air.
In Europe the windows open and closes a way we have to le it open for the hose.
I looked for a design holding in place some isolation material inside the window opening.
The goal is the prevent the material from being sucked inside the room by the air depression (I know a better design of the air conditioning system would have 2 hoses ... but we dont have those in Europe.
Solution
Some kind of hook to put between isolation material and the window.
This hook has a hole for holding any kind of staff
To fit on the window I needed (my window frame is that way) a 5mm "grip" starting after 10mm outward. See the sketches for various dimensions.
The stick I used has a section of 20mm by 35mm.
The freecad design is available for you to customise the sketch as needed.
Note about the 3mf, I used a modification of the infill to have full objects on the part going outward. This is to cope with the forces applied by the air.