Mobile Air Conditioner Window Seal fastener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bracket to put on a window in order to hold in place the Isolation material
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Goal
When using mobile air conditioning device there is a hose pushing out hot air.
In Europe the windows open and closes a way we have to le it open for the hose.
I looked for a design holding in place some isolation material inside the window opening.
The goal is the prevent the material from being sucked inside the room by the air depression (I know a better design of the air conditioning system would have 2 hoses ... but we dont have those in Europe.
Solution
Some kind of hook to put between isolation material and the window.
This hook has a hole for holding any kind of staff
To fit on the window I needed (my window frame is that way) a 5mm "grip" starting after 10mm outward. See the sketches for various dimensions.
The stick I used has a section of 20mm by 35mm.
The freecad design is available for you to customise the sketch as needed.
Note about the 3mf, I used a modification of the infill to have full objects on the part going outward. This is to cope with the forces applied by the air.