1 / 6
Case for OMRON M2 Tonometer / Blood Pressure Monitor — zdjęcie 1
1 / 6

Case for OMRON M2 Tonometer / Blood Pressure Monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective Shell & DIY Holter Mod for OMRON M2 Tonometer

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade and protect your OMRON M2! 🩺⚙
This project is designed to wrap around the main body of the OMRON M2 tonometer, protecting it from everyday scratches and minor bumps. Whether you just want basic protection or want to build your own automated blood pressure logger, there is a version for you.

Choose Your Variant:
Variant 1: Snap-On Shell

  • A clean, minimalist protective cover. The top part simply snaps onto the main body. Perfect for basic scratch protection on your desk or in a bag.

Variant 2: Secure Clip-On Shell

  • Features additional side clips to lock the top part firmly in place.

  • Requires 4x M3x30 mm screws for a secure and durable assembly.

  • Recommended if you carry the device around frequently and want to ensure it won't pop open.

Variant 3: The "DIY Holter" Mod

  • This version is modified for home automation and continuous monitoring.

  • Includes a dedicated mount for a small servo motor positioned right above the "Measure" button.

  • Use an Arduino/ESP32 to trigger the servo, pushing the button automatically at set intervals.

  • If you have the "Connect" version of the OMRON M2 (with Bluetooth), this allows you to create a DIY Holter monitor that automatically takes readings and syncs them to your phone.

  • Features narrow slots at the bottom designed to fit a standard 25mm wide webbing strap to attach the device safely to your body or near your bed.

Required Hardware:

  • Variant 2: 4x M3x30 mm screws

  • Variant 3: 1x Micro Servo (e.g., SG90)

  • Variant 3: Microcontroller (Arduino, ESP32, etc.)

  • Variant 3: 25mm webbing strap (Buckle can be printed separately)

Tagi