1 / 4
Ikea SJÖSS 20W/65W Cable Winder (LILLHULT or RUNDHULT) — zdjęcie 1
1 / 4

Ikea SJÖSS 20W/65W Cable Winder (LILLHULT or RUNDHULT)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a custom-made winder designed for the IKEA SJÖSS 20W/65W USB-C charger and LILLHULT or RUNDHULT cables (1.5m).

Ocena
5 / 5
Polubienia
3
Pobrania
20
Wydruki
1
Wyświetlenia
96
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

ENGLISH (french below)

Here is a custom-made winder designed for the IKEA SJÖSS 20W and 65W USB-C charger and LILLHULT or RUNDHULTcables (1.5m). I chose this charger and cable combination because they offer excellent value for money and are easily available worldwide.

The charger is held in place by a friction fit. The part has been designed to accommodate the charger in two different positions:

  • Plug Out (In-Use Mode): You can plug the charger into your outlet and unwind only the exact length of cable you need. The USB-C port remains easily accessible for plugging and unplugging, while being protected from bumps by the walls of the printed part.

  • Plug In (Storage Mode): The prongs can also be tucked inside the spool. This provides the most compact setup possible to store everything safely, without risking any damage when you travel.

Tip: To keep the cable perfectly wound on its spool, simply use the original elastic strap provided by IKEA with the cable (as shown in the photo)!

Design and Printing Details
  • Precise Fit: Specifically designed for the rectangular shape of the IKEA SJÖSS 20W and 65W brick with a Type E plug (European compatible). The part hasn't been tested with Type A plugs (used in North America and Japan) but should be compatible.

  • Optimized for 1.5m Length: The spool is sized perfectly to fit Lillhult and Rundhult braided cables.

  • Easy Printing (No Supports): The geometry is optimized to be printed completely without supports. Bridging is easily handled with standard print settings.

  • Source files included: To ensure everyone can make the most of it, I am providing the STEP and F3D source files. If you own a charger or cable from another brand, you can easily modify the dimensions and adapt the spool to your needs!

Source files included

To ensure everyone can make the most of it, I am providing the STEP and F3D source files. If you own a charger or cable from another brand, you can easily modify the dimensions and adapt the spool to your needs!

Discover my other projects

I share all of my creations, documentation, and DIY projects on my website: https://carnet28.com/. Feel free to check it out!

Inspiration

This design was inspired by the "Brick Buddy" model by Vega3Dprinting for the Apple 20W charger.

 

— 

FRANÇAIS

Voici un enrouleur sur mesure conçu pour le chargeur IKEA SJÖSS 20W et 65W USB-C et les câbles LILLHULT ou RUNDHULT (1,5m). J'ai choisi ce combo chargeur et câble car ils offrent un excellent rapport qualité/prix et sont faciles à se procurer dans le monde.

Le chargeur tient dans la pièce imprimée par friction. La pièce a été pensée pour recevoir le chargeur dans 2 positions :

  • Prise sortie (Mode utilisation) : Vous pouvez brancher le chargeur à votre prise et ne dérouler que la longueur exacte dont vous avez besoin. Le port USB C reste facilement accessible pour être branché ou débranché, tout en étant protégé des coups par les parois de la pièce imprimée.

  • Prise rentrée (Mode rangement) : Les broches peuvent aussi être rentrées à l'intérieur de la bobine. Cela permet d'obtenir la configuration la plus compacte possible pour ranger l'ensemble en toute sécurité, sans risquer d'abîmer l'ensemble quand vous le transportez.

Astuce : Pour que le câble reste parfaitement enroulé sur sa bobine, utilisez simplement l'attache élastique d'origine fournie par IKEA avec le câble (comme visible sur la photo) !

Détails de conception et d'impression
  • Ajustement précis : Dessiné spécifiquement pour le format rectangulaire du bloc IKEA SJÖSS 20W et 65W avec prise type E (compatible en Europe). La pièce n'a pas été testée mais devrait être compatible avec les prises de type A (compatible sur le continent Américain et au Japon).

  • Optimisé pour le format 1.5m : La bobine est dimensionnée pour accueillir des câbles tressés Lillhult et Rundhult.

  • Impression simple (Sans support) : La géométrie est optimisée pour être imprimée sans aucun support. Les ponts (bridging) se gèrent d'eux-mêmes avec des paramètres standards.

  • Fichiers sources inclus : Pour que chacun puisse en profiter au maximum, je fournis les fichiers sources STEP et F3D. Si vous possédez un chargeur ou un câble d'une autre marque, vous pourrez ainsi facilement modifier les dimensions et adapter la bobine à vos besoins !

Fichiers sources inclus

Pour que chacun puisse en profiter au maximum, je fournis les fichiers sources STEP et F3D). Si vous possédez un chargeur ou un câble d'une autre marque, vous pourrez ainsi facilement modifier les dimensions et adapter la bobine à vos besoins !

Découvrez mes autres projets

Je partage l'intégralité de mes créations, documentations et projets DIY sur mon site : https://carnet28.com/. N'hésitez pas à y faire un tour !

Inspiration

Ce design a été inspiré par le modèle "Brick Buddy" de Vega3Dprinting pour le chargeur Apple 20W.

Tagi