Filament Spool Guide Fix for outer sides of Creality SpacePi X4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fix for the Creality SpacePi X4 prevents spools from getting stuck at the outer edges of the spool rollers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The Problem
In my Creality SpacePi X4, filament spools fall into the crevice at the edge of the spool roller and get stuck, causing filament to not feed to the printer.
This fix prevents spools from falling into the outer crevices.
For the inner crevices, this fix by @investigate works wonderfully.
Printing
Use a high temp material so that it won't melt in your hot SpacePi.
I used Prusament PC CF and it prints and works wonderfully.
I used
2 bottom and top layers
2 perimeters
20% cubic infill
I don't think this part has to be very strong. Just a little stiff.
Install
Simply drop the part in to your SpacePi between the spool and the wall, resting on the ledge at each end of the SpacePi. It just sits there loose, could move around a little, but does its job.
