1 / 1
Adapters for the dual Z belted Ender and aliexpress gantry support — zdjęcie 1

Adapters for the dual Z belted Ender and aliexpress gantry support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With this bracket you can continue using your aliexpress gantry support kit with the dual Z motor belted Ender.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This version is only for dual Z motors. The bracket is ugly, but does the job and is quite stiff, even in PETG.

The bracket is fully symmetrical, just print two. You will need a M5 nut, three M5x12 screws and 1x M5x20 (or a bit longer) screw per bracket. Print with the same settings as the belted Ender parts.

Tagi