Improved light bar police light for clogs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
light bar for crocs. angled up and two connectors for better aesthetic.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you liked the simple overhead lights for your Crocs you'll love this. I added a 45 on the bottom and an extra connector so it sits on the top two holes of your crocs. This will let anyone know you mean business. This print took 1hour 45minutes on the SnapmakerU1 and 21.99 grams of filament including waste. I oriented it with the top of the bar on the plate, lowered the layer height to .15 on a .4mm nozzle, ironing on, 16% gyroid infill (just because), enabled tree supports and support ironing, rectangle prime tower with width and volume at 20/20 (to save on waste), flush to infill (also to save on waste), everything else was left as it was. It pairs nicely with the Push bumper!